DGTP Panel Mount Weight Indicator/Transmitter

Description

The DGTP is an easy to read weight indicator capable of performing well in most industrial applications.

A panel mount system allows this indicator to be safely and efficiently fitted to most machinery and works exceptionally well for dosage systems and automation.

Features Include:-

• Easy to use 5-key waterproof keyboard.
• Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
• Case for panel mounting. Dimensions: 143,5 x 72 x 129mm(lxhxw). Drill template: 135,6 x 66,5 x 120mm(lxhxw).
• A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
• Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
• Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
• Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
• Calibration, Set-Up parameters, configurable from keyboard or from PC.
• Up to 8 signal linearization points
• Fitted real time clock.
• From 12 Vdc to 24 Vdc power supply.

MAIN CERTIFICATIONS

• EC Type Approval (EN45501)
• OIML R76
• OIML R61 – MID

I/O SECTION

• 1 RS232/C or RS485 bidirectional port configurable for connection to PC or external units.
• 1 RS232/C bidirectional port configurable for connection to printer.
• 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
• 4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.

TRANSMITTER / INDICATOR: FUNCTIONS

• THROUGH KEYBOARD:
  • Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
• SELECTABLE:
  • High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak.
• EXTERNAL INPUT:
  • Simulation of key pressure; Keyboard lock.
• MOSFET OUTPUT:
  • Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
• SERIAL PORTS:
  • On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds.
• DGTP and DGTPAN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
• Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).